OTT ecoLog 500, Руководство по эксплуатации

Страница: 26 / 56

9 Setting OTT ecoLog 500 (3G) operating parameters
To set the OTT ecoLog 500 (3G) operating parameters, you will need the "OTT
Water Logger Operating Program" PC software (WBSPL0.exe). This software is
found on the "OTT Water Logger Software" CD-ROM (accessory).
Hardware and software requirements: refer to CD product insert.
9.1 Installing the OTT Water Logger Operating Program
How to install the OTT Water Logger Operating Program
Insert the OTT Water Logger Software CD-ROM into the PC drive.
In the "\Software\Deutsch"
1)
directory, start the "setup.exe" file (by e.g. dou-
ble clicking the file symbol)
➝
The Setup Assistant opens and guides you
through the installation.
Follow the installation instructions on the screen.
1)
Alternatively: change to the "\English", "\Français", or "\Español" directories.
9.2 Establishing the PC/OTT ecoLog 500 (3G) communication link
(on site)
In the following chapters, establishing a communication link between the OTT
ecoLog 500 (3G) and a PC is described, which is a pre-requisite for the subse-
quent steps. The following description illustrates the various methods of establish-
ing this communication link.
The communication between the OTT ecoLog 500 (3G) and a PC is established
contact-less via invisible infrared light (IrDA interface).
Required accessories:
OTT DuoLink reading head
2)
or
OTT IrDA-Link USB reading head
2)
with PCB version "b": refer to the label on the connection line
How to establish a communication link
Start the operating program.
Change the language for the operating program as required:
press F3 function key (multiple times) until the required language appears.
In the start window, press the "Setup device" button
➝
The operating program
displays the "Basic operation" window. No operating parameters for the
OTT ecoLog 500 ( 3G) are visible yet.
– Establishing a communication link to the OTT Duolink reading head:
Connect the OTT Duolink reading head to a serial PC port (COM1, etc.).
Place the OTT DuoLink reading head onto the OTT ecoLog 500 (3G) infrared
interface, refer to Fig. 16.
In the operating program, select the communication path
"IrDA OTT DuoLink" and the serial port used (COM1, ...).
26