OTT HydroMet SUTRON XLINK 100, Руководство по эксплуатации и техническому обслуживанию

Страница: 98 / 248

Page 98 of 248

4/14/2016 16:12:00 MX 32.060 G

4/14/2016 16:39:00 MN 28.454 G
Explanation of the logged data above: At 16:00 the hourly measurement that started at 15:00 is complete.
The average gets timestamped with 16:00. However, the actual maximum value of 31.248 happened at
15:24 and the minimum value of 25.661 happened at 15:15.
Likewise, at 17:00, the measurement that started at 16:00 is complete. The maximum happened at 16:12
and the minimum at 16:39.
When it comes time to transmitting minimum and maximum results, a unique timestamp will be included
with each value transmitted. An example below illustrates the formatting:
:ATMIN 91 #60 22.47 :ATMIN 101 #60 22.50 :ATMIN 191 #60 22.53
:ATMAX 71 #60 22.52 :ATMAX 136 #60 22.54 :ATMAX 216 #60 22.58
:ATAVG 41 #60 22.50 22.52 22.56
:ATMIN 91 #60 22.47 means that a minimum of 22.47 occurred 91 minutes ago.
:ATMIN 101 #60 22.50 means that a minimum of 22.50 occurred 101 minutes ago.
Contrast that format with :ATAVG which provides four readings on the same line, most recent one 41
minutes ago, and subsequent readings each an hour later.
10.3 Configuration Settings
10.3.1 Measurement Type
The Measurement Type setting (in the Sensor section) will determine what kind of measurement is made.
Each of the different types will unlock other settings. For example, choosing Analog as the Measurement
Type will unlock the Analog Type setting.
The available Measurement Type options are

Precip Accumulation

Precip Rate

SDI-12

Analog

Battery Voltage

Wind

Digital

Meta

Manual Entry

Internal Temp

Modbus
Below are listed all the Measurement Types available.