OTT HydroMet SUTRON XLINK 100, Руководство по эксплуатации и техническому обслуживанию

Страница: 90 / 248

Page 90 of 248
9 Setup
XLink operation is controlled by its setup. The user has the option of changing any part of the setup. The
setup is stored in non-volatile memory and will not be affected when the unit loses power.
The LinkComm application is the easiest and fastest way to program your station.
Setup can be changed while the station is collecting data. However, if the station is in the middle of
making a measurement when the relevant setup is changed, unexpected effects may occur. Even if
unexpected effects occur, the next measurement will be made correctly.
Changes to setup will not affect previously logged data.
Every time setup is changed, it is noted in the log with the entry setup changed. Details of the setup
change are not logged.
If a password is enabled, changes to setup cannot be made until the password is entered.
The setup is broken into three sections discussed in detail in the next chapters:

measurement setup

telemetry setup

other setup
Remember that if you ever see at the top of LinkComm, the setup in LinkComm differs from the setup in
the station. If the c
hange is deliberate, press the “changed” control to update the station setup. If the
change is accidental, use the Main Menu, Get setup From Station function.
You can also change the setup by sending messages to the station via one of the optional modems. As an
alternative to LinkComm, you can use any terminal program to access all of the features via the command
line interface described in section
17 C
OMMAND
L
INE
I
NTERFACE
.