Page
78
of
248
You can also obtain the version of the software using the VER command via command line.
7.14
Setting Time
Station time can be viewed via LinkComm on the Dashboard tab. Note that the time shown in the
dashboard is a snapshot of the time.
To set the time, use LinkComm’s Diagnostics tab and click the Set Clock button.
Use the
Local Time Offset
to convert the time from UTC to a local time zone. The setting is found on the
Other Setup tab in LinkComm.
7.14.1
Automatic Time Sync
Stations equipped with a modem will automatically their clock to network time. Unless you change the
setting (as per section
), the station will use UTC time.
Stations equipped with an Iridium modem will automatically sync their clock to network time.
Stations equipped with a cell modem will automatically sync provided they are running firmware
version 8.28 or newer. Please see
Содержание SUTRON XLINK 100
Страница 1: ...Operations Maintenance Manual SUTRON XLINK 100 500 Part No 8800 1217 Rev 8 44 4 January 14 2022...
Страница 230: ...Page 230 of 248...
Страница 247: ...Page 247 of 248...
