OTT HydroMet SUTRON XLINK 100, Руководство по эксплуатации и техническому обслуживанию

Страница: 131 / 248

Page 131 of 248

/ottml.htm?ws=99
FTP Path
This setting may be used to deliver FTP data to a specific path on the server. Please note that the station
CANNOT create directories. The path must exist on the FTP server before the station can deliver files to it.
An example of a path: “Rain_station/A2/B12”.
When it delivers data to an FTP server, the station creates a new file with each delivery. The file name will
be made up of the Station Name and the time of the transmission:

StationID_YYYYMMDDHHMMSS

Station ID is the first 15 characters from the Station Name setting. (prior to version 8.28, it
was only 10 characters).

The rest of the filename is based on the date and time of the transmission.

The file extension is based on the Tx Format setting: “shf”, “pbn”, “csv”, “ mis ”
SMS Tx Phone A, B, and C
When it is time to make a scheduled transmission, if Tx Mode is set to SMS, the station will send data to
the phone number(s) set up in SMS Tx Phone .
If you want data delivered to just one phone, enter it into SMS Tx Phone A, and leave SMS Tx Phone B and
C blank. To deliver to a second phone number, enter the number in SMS Tx Phone B. Use SMS Tx Phone C
to deliver data to a total of three different numbers.
11.2.3 Cell Global Settings
These settings are found on the Other Setup tab of LinkComm. Please read on for a list and description of
each setting.
Cell Listening
If enabled, Cell Listening will cause the station to keep the cellular modem on all the time. This makes it
possible to connect to the station with LinkComm over the internet at any time. It also ensures that
incoming SMS are received immediately. However, it significantly increases the power consumption.
If Cell Listening is not enabled, the station will only power on the modem when it makes transmissions,
when it checks for messages, when it boots up, and when the operator is inspecting the station.
Listening is automatically turned on by the station for 10 minutes at these times:

At boot up

When the station is connected to, whether via USB, over the modem, or over Wi-Fi

When an SMS is received
Additionally, listening is on for 5 minutes

After a transmission is completed