otometrics MADSEN Alpha OAE Скачать руководство пользователя страница 28

Страница: 28 / 68

Test details

Shows which ear is being tested.

Bar chart

Noise

Registered DPOAE response: Frequency passed

DPOAE frequency being tested or referred

The height of the bars represents the noise/response amplitude.

The test frequencies are shown below the bar chart.

DPOAE

Response at current test frequency.

Noise

Current noise level. Make sure the noise level is as low as pos-
sible.

Test duration - Regular DPOAE

Approximately 10 seconds on patients with normal hearing under quiet conditions, but highly dependent on test con-
ditions in general.

5.3.3

DPOAE test results

In Child Mode, when a test is completed, the Reward screen is displayed. This screen shows an animated bunch of balloons
floating up to the sky. The outcome of the test is then displayed on the

Test result

screen.If Child Mode is not activated,

the

Test result

screen is displayed immediately after the test is completed.

See

Options in the test result screens

►

for a description of the buttons available.

The results for Alpha OAE are measured and shown in decreasing frequencies. The frequencies tested are:

5000 Hz
4000 Hz
3000 Hz
2000 Hz

The L1/L2 pair is 65/55 dB SPL. Only

is shown.

Otometrics - MADSEN Alpha OAE

5 Testing with Alpha OAE

Содержание MADSEN Alpha OAE





































































Результаты поиска

Содержание MADSEN Alpha OAE

Отзывы:

Бренды по названию

Популярные бренды

otometrics MADSEN Alpha OAE, Руководство пользователя

Результаты поиска

Содержание MADSEN Alpha OAE

Отзывы:

Бренды по названию

Популярные бренды