Otodynamics Otoport Lite Скачать руководство пользователя страница 193

Страница: 193 / 208

Otoport OAE+ABR

User Manual for Otoport Lite model

193

Technical specifications

Guidance and manufacturer’s declaration – electromagnetic emissions

The Otoport OAE+ABR is intended for use in the electromagnetic

environment specified below. The user of the Otoport OAE+ABR should

ensure that it is used in such an environment.

Emissions test

Compliance Electromagnetic environment

- guidance

RF emissions

Group 1

The Otoport OAE+ABR uses RF energy

CISPR 11

only for its internal function. Therefore,

its RF emissions are very low and are

not likely to cause any interference in

nearby equipment.

RF emissions

Class B

The Otoport OAE+ABR is suitable

CISPR 11

for use in all establishments, including

domestic establishments and those

directly connected to the public low-

voltage power supply network that

supplies buildings used for domestic

Harmonic emissions Class A

purposes.

IEC 61000-3-2

Voltage fluctuations/ Complies

flicker emissions

IEC 61000-3-3

24.3

Electromagnetic Compatibility:

Otoport OAE+ABR

The Otoport OAE+ABR should be put into service according to the EMC

(Electromagnetic Compatibility) information provided here.
Portable and mobile RF (Radio Frequency) communications equipment can

affect the operation of the Otoport OAE+ABR. In particular, mobile telephones

(‘cellphones’) should not be operated within 10m of the Otoport OAE+ABR.
The use of probes, electrodes, chargers and connection cables other than those

supplied by Otodynamics Ltd, and specifically for use with the Otoport OAE+ABR

may result in increased emissions or decreased immunity of the Otoport OAE+ABR.

The Otoport OAE+ABR should not be used adjacent to or stacked with other

equipment and that if adjacent or stacked use is necessary the Otoport OAE+ABR

should be observed to verify normal operation in the configuration in which it is used.

Содержание Otoport Lite

















































































































































































































Результаты поиска

Содержание Otoport Lite

Отзывы:

Otodynamics Otoport Lite, Руководство пользователя, Страница: 193 / 208

Результаты поиска

Содержание Otoport Lite

Отзывы: