Otodynamics Otoport Lite Скачать руководство пользователя страница 137

Страница: 137 / 208

Otoport OAE+ABR

User Manual for Otoport Lite model

137

Scanning

13.1

Scanning facility

As well as the standard data entry method

using the keypad, the Otoport provides

two optional methods for data entry using

scanners. The scanning methods are

designed to reduce testing session times by

making the patient data entry method efficient.

The scanners can also be used as part of

the device security system during login. Each operator can be assigned a

to the machine.

13.2

Scanner types

The Otoport has two scanning methods available.

13.2.1

Barcode scanning

This method will scan barcodes which as standard hold numerical data.

In screening programs which use barcode identification for patient ID, the

Otoport can be used to scan this number quickly into the device.

To scan with the barcode scanner, position the Otoport parallel with the

barcode at a distance of around 10cm and select

Scan

. Line up the red

light across the barcode.

Содержание Otoport Lite

















































































































































































































Результаты поиска

Содержание Otoport Lite

Отзывы:

Otodynamics Otoport Lite, Руководство пользователя, Страница: 137 / 208

Результаты поиска

Содержание Otoport Lite

Отзывы: