Otodynamics Otoport Advance Скачать руководство пользователя страница 240

Страница: 240 / 296

CHAPTER TWENTY-FOUR

Otoport power

240

24.3

Standby

To save power, the Otoport will go into standby mode after 90 seconds of

inactivity.

The Otoport will not go into standby if a test is being performed.

If the Otoport goes into standby with a test result that has not been saved,

then a beep will sound for five seconds in every minute to alert the user.

To resume from standby, press any key on the keypad. The Otoport will

wake up and return to the previous screen displayed.

If the Otoport is left for 20 minutes in standby it will turn off.

Notes:

Following an OAE recording, always save test data, as data that

has not been saved prior to auto switch off will be lost.

Over time batteries will wear and lose their capacity, resulting in

quicker discharge. The batteries may therefore need replacing

around every 4 years of use.

Otoport power

Содержание Otoport Advance









































































































































































































































































































Результаты поиска

Содержание Otoport Advance

Отзывы:

Похожие инструкции для Otoport Advance

Бренды по названию

Популярные бренды

Otodynamics Otoport Advance, Руководство пользователя

Результаты поиска

Содержание Otoport Advance

Отзывы:

Похожие инструкции для Otoport Advance

Бренды по названию

Популярные бренды