The Swim Kit is a waterproof solution for Neuro 2 sound processor allowing water immersion for 2 hours at depths
up to 3 meters. This accessory keeps your processor dry during water activities, such as swimming, boating or kayaking.
Intended Use
The Swim Kit is an accessory that provides extended protection to the Neuro 2 sound processor when used
in water or humid and dusty environments.
The Swim Sleeve is designed to be used for one year or 50 times depending on which one is reached first. Always carefully
inspect the Swim Sleeve before and after use. If you observe any changes to the sleeve material or tightness, stop using the
sleeve and order new ones (Swim Sleeves Kit).
The information in this Quick Reference Guide does not replace the Swim Kit Instructions for Use. Make sure to familiarise
yourself with the Swim Kit by reading the Instructions for Use.
Cochlear Implant System
Neuro 2 Swim Kit
Quick Reference Guide
Open the lid of the Swim Sleeve.
Inspect the Swim Sleeve to ensure it is free from any dirt, dust
and hair fragments in the opening for the Swim Antenna con-
nector, and the opening and lid for the processor insertion.
Insert the sound processor fully into the Swim Sleeve.
During the insertion, bend the sleeve and carefully lead the
sound processor hook to its place to avoid it is stocked to the
sides.
How to Insert the sound processor into the Swim Sleeve
Note:
Always use rechargeable batteries to power the sound processor when using the Swim Kit. Zinc-Air batteries rely on
fresh air supply to produce power and therefore cannot be used inside a Swim Sleeve.
