SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
5-4
Table 5-2 Parameter Descriptions for the Binding of VoIP port
Parameter
Description
Hotline To
Hot line number which is dialed automatically when the user picks up the
headset of the phone. It is valid only if the
delayed hot line
function is
enabled (see just below).
Hotline
•
Disabled
: hotline service deactivated
•
Delayed Hotline
(Warmline
): hotline service activated
The hotline service must be network enabled only after the customer’s
request.
Call Waiting
Set radio button to
On
to enable call waiting function (local operation). Must be
network-enabled.
Incoming
Bind the
SIP
account e.g.
SIP Account-1
or
SIP1
that is configured for each
Phone
port that is
Phone 1 or 2
for incoming calls.
Outgoing
Bind the
SIP
account e.g.
SIP Account-1
or
SIP1
that is configured for each
Phone
port that is
Phone 1 or 2
for outgoing calls.
3.
Click the
Apply
button to apply the changes.
– End of Steps –
