OSYPKA PACE 203H, Инструкция по эксплуатации

Страница: 93 / 139

PACE 203H – Instructions for Use
5I-17-016X-B-20 93 / 139
PACE 203H
Warning Message
Meaning / Cause Measures to Eliminate the
Conflict / Error See
Chapter
Decrease
PVARP or
MTR
to increase
A-V Delay
The user has attempted to increa-
se A-V Delay. This led to conflict
(type d), because there is inade-
quate time for a long A-V Delay in
the presence of a high MTR and a
long PVARP. Decrease PVARP and/or MTR
before further increase of A-V
Delay. 9.22.7
Decrease
A-V Delay
or Rate
to increase
PVARP
The user has attempted to increa-
se PVARP. This led to conflict
(type b), because there is inade-
quate time for a long PVARP in
the presence of a high rate and a
long A-V Delay. Decrease A-V Delay and/or
rate before further increase of
PVARP. 9.22.7
Decrease
A-V Delay
or MTR
to increase
PVARP
The user has attempted to increa-
se PVARP. This led to a conflict
(type d), because there is inade-
quate time for a long PVARP in
the presence of a high MTR and
long A-V Delay. Decrease A-V Delay and/or
MTR before further increase of
PVARP. 9.22.7
Decrease
PVARP or
A-V Delay
to increase
MTR
The user has attempted to increa-
se MTR. This led to a conflict (type
d), because the sum of PVARP
and P-V delay is too long. Decrease PVARP and/or A-V
Delay before further increase of
MTR. 9.22.7
Decrease
Rate
to decrease
MTR
The user has attempted to de-
crease MTR. This led to a conflict
(type a), because rate is set to an
excessively high value. Decrease Rate before further
decrease of MTR. 9.22.7
Decrease
PVARP
to increase
Rate
The user has attempted to increa-
se the rate. This led to a conflict
(type b), because the sum of
PVARP and A-V Delay is too long
with respect to the rate or MTR. Decrease PVARP or set to
"Auto PVARP" before further in-
crease of rate.
Alternatively, manually set A-V
Delay or (in case of a conflict
type d) MTR to a lower value. 9.22.7
Decrease
A-V Delay
to increase
Rate
The user has attempted to increa-
se rate. This led to a conflict
(type b or d), because the sum of
PVARP and A-V Delay is too long
with respect the rate or MTR. Decrease A-V Delay or set to
"Auto AVD" before further in-
crease of rate.
Alternatively, manually set
PVARP or (in case of a conflict
type d) MTR to a lower value. 9.22.7