OSTBERG HERU 400-2400 S, Руководство пользователя

Страница: 15 / 120

15 / 120
2018-02-13 Climatix HERU® 400-2400
Important information
2. Important information
Information is provided for each individual function on the menu in the control unit/HMI.
Because of this, the information in the example menu screenshots may not be consistent
with the information provided in the HMI of each individual HERU® CX unit. Sometimes all
of the rows of information are described, when in reality only a limited number of menu
rows will be visible. The reason for this is that, to simplify handling for the user, non-
selected functions and settings are
“turned off” at configuration. If any information is not
provided in the display, that function or input is probably not configured/enabled. See 0
for more information.
This document describes general functions and components that are directly connected to
the HERU® CX unit.
The software may include functions and concepts related to moisture, humidification
and/or dehumidification. All such information has been omitted in this document. H.
Östberg AB does not accept any responsibility for these functions, as it is not our intention
to treat air using humidification or dehumidification.
The software is continuously developed and improved, and therefore H. Östberg AB shall
not be held accountable for any discrepancies that may appear in this document, and also
reserves the right to modify data and design.
Abbreviations
Abbreviation Explanation
BMS Building Management System (parent control system)
BSP Board Support Package (firmware)
EXP1 Expansion module 1, module for multiple outlets and inlets
EHC Electric Heating Coil (electric air heater)
HERU® S CX HERU® Side-connected unit with Climatix control
HERU® T CX HERU® Top-connected unit with Climatix control
HERU® CX HERU® unit with Climatix control (data applies to both S & T)
HMI Human Machine Interface (control panel)
LED Light Emitting Diode (light diode for indication)
NC Normally Closed (opening switch at signal)
NO Normally Open (closing switch at signal)
OEM Original Equipment Manufacturer
PROC1 Processing unit 1 (Climatix base unit)
Important!