Potentiostat
User Manual
Ossila.com
14
Ossila Limited © 2020
II.
To rescan for connected units (in case the connection is changed) click the refresh
icon next to the drop-down box.
(II)
Current Range
•
Select the range of currents to be used for the measurement or automatic range selection.
I.
This defines the upper limit, accuracy, and resolution of the current measurements
that can be performed by the system.
II.
Automatic range selection will start on the lowest current range and automatically
switch to higher ranges if the current increases above the maximum for a range.
(III)
Start Potential (V)
•
The potential in volts at which the measurement starts.
(IV)
Potential Vertex 1 (V)
•
The first potential in volts at which the scan changes direction.
(V)
Potential Vertex 2 (V)
•
The second potential in volts at which the scan changes direction.
(VI)
Scan Rate (mV/s)
•
The rate at which the potential will be changed during the scan, measured in millivolts per
second.
(VII)
Cycles
•
The number of times the scan will be repeated.
9.2.2
Saving and Loading Settings
Figure 9.4.
Controls for saving and loading settings profiles.
(I)
Save Settings
•
Saves the current settings as a profile that can be loaded quickly for use at another time.
•
When clicked, you will be prompted to name the settings profile.
