OSSIA NVR5 Series, Руководство пользователя

Страница: 88 / 115

Remote Surveillance User Manual
87
➢
PPPoE Settings
In the above interface, mark “Enable” in “PPPoE Settings” and input the username and
password. Click “Apply” to save the settings.
11.1.2 Port Configuration
Click Start

Settings

Network

Port. Input the HTTP, server and RTSP ports of the device
and click “Apply” to save the settings.
HTTP Port : the default HTTP port of the device is 80. The port number can be changed. The
port is mainly used for direct IE and mobile application remote access via static IP or DDNS.
To access the device through IE, input the IP address plus HTTP port in the address bar for
example: http://192.168.11.61:81. (If the HTTP port is 80 – there is no need to input it)
Server Port : the default server port of the device is 6036 and it can be changed as required. The
port is mainly used in network video management system like CMS.
RTSP Port : RTSP (Real-Time Stream Protocol) can be used to retrieve the video stream from