OSS TEN O3, Руководство по эксплуатации

Страница: 17 / 22

Operating manual for ozone generator
16
6. Maintenance
Die Ozongeräte sind wartungsarm, trotzdem bedarf es immer wieder einer visuellen.
The unit must be cleaned regularly from the outside, especially at the air inlets and
outlets, as dust and dirt may accumulate there over time. In addition, the air filter
must be cleaned at regular intervals to remove any sucked-in dirt by knocking it off,
otherwise the performance of the unit will be reduced. The air filter is removed by
dismantling the air filter cover, which is attached with clips.
After some time the performance of the ozone device decreases. The ozone plate is
a wearing part, this is indicated by a reduced ozone generation.
In this case, the device must be sent to the manufacturer for replacement so that the
ozone plate(s) can be replaced for a fee.
Figure 4 Air filter cover
Never clean the device with running water or a wet cloth!