OSS TEN O3, Руководство по эксплуатации

Страница: 12 / 22

Operating manual for ozone generator
11
4.3. Commissioning
The ozone generator needs a 220-240V AC, 50-60Hz supply and should be supplied
with power immediately before use. If a gas supply is carried out in an unheated
room which is later used at a higher temperature level, the risk of subsequent
evaporation is very high. Therefore, the room temperature during treatment should
always be approx. 5°C above the later usage temperature.
Figure 1 Overview of the controls (Figure TEN O3)
Before commissioning:
Please hermetically close all air inlets and outlets (doors & windows) of the treated
area to prevent uncontrolled distribution of ozone. The room to be treated must be
provided with warning signs to prevent unintentional entry into the rooms. The device
must be placed in a firm and stable place.