OSS EOS-2U-4A, Руководство пользователя, Страница: 34 / 54

One Stop Systems
OSS-EOS-2U-4A | 34
10 M.2 NVME Installation
The X12DPG-QT6 motherboard has two PCIe 4.0 M.2 slots. The M.2 slots on the motherboard support PCIe 4. x4 M.2 NVMe SSDs in the 2242,
2260, 2280, and 22110 form factors.
Follow this step-by-step guide on how to install PCIe M.2 SSD in your computer.
Step 1 : Remove the mounting screw located across from the M. 2 slot.
Step 2: Align the M.2 Key edge connector to the M.2 key edge socket on the board
Step 3 : Slowly insert the media at ~30-degree position into the socket until it is fully seated. The SSD will naturally stand at an angle when
inserted, this is normal. See photos below.
Step 4: Secure the M.2 SSD using the mounting screw. Press down and hold the M.2 SSD while you replace the mounting screw that was
removed in Step 1. This will secure the SDD in place. See photos below.