background image

One Stop Systems 

 
 

 

EB4400 (5-SLOT BP)   

 

 

 

 

 

                                                                                        69 

 

 
 

16 

How to Get More Help 

You can visit the Technical Support FAQ pages on the Internet at  

https://www.onestopsystems.com/support

 

 

16.1 

Contacting Technical Support 

Our support department can be reached by phone at 

1 (760) 745-9883

. Support is available Monday through Friday, 8:00 AM to 5:00 PM PT.  When contacting 

Technical Support make sure to include the following information:  

1. Exact and correct serial # 
2. Service Ticket or Case # (if you already submitted an online request)  
3. Computer Type & Model: Operating System 
4. Make & Model of PCI/PCIe cards: Application 
5. Problem description 
  

When submitting an online technical support request always provide a valid working e-mail address, phone number, shipping address and proper contact name.  
Check your e-mail for an automated response containing the case # and updates.  You can also visit our web site at: https://www.onestopsystems.com/support for 
a quick response, use the Technical Support and RMA Request Form available in the Support Section of the website.  Simply complete the form with all required 
information. Please make sure that your problem description is sufficiently detailed to help us understand your problem.  
 

Shipping or Transporting of Expansion Unit with PCI / PCIe cards 

Any PCIe cards in 

should be removed

 (or not to be installed) prior to shipment to avoid or prevent possible damage.  Note: Expansion board and PCIe / PCI cards 

that arrive damaged in shipment will not be covered under warranty. 

 

16.2 

Returning Merchandise  

If factory service is required, a Service Representative will give you a Return Merchandise Authorization (RMA) number. Put this number and your return address on 
the shipping label when you return the item(s) for service. Please note that One Stop Systems WILL NOT accept COD packages, so be sure to return the product 
freight and duties-paid.  Ship the well-packaged product to the address below: 

Attention:RMA # ________, One Stop Systems 
2235 Enterprise Street, #110 
Escondido, CA 92029 
USA 

It is not required, though highly recommended, that you keep the packaging from the original shipment of your  product. However, if you return a product for 
warranty repair/ replacement or take advantage of the 30-day money back guarantee, you will need to package the product in a manner similar to the manner in 
which it was received from our plant.  We cannot be responsible for any physical damage to the product or component pieces of the product (such as the host or 
expansion interfaces for the expansion chassis) that are damaged due to inadequate packing. Physical damage sustained in such a situation will be repaired at the 
owner’s expense in accordance with Out of Warranty Procedures. Please, protect your investment, a bit more padding in a good box will go a long way to insuring 
the device is returned to use in the same condition you shipped it in. Please call for an RMA number first. 

 

16.3 

Third Party Hardware & Software Support Policy 

OSS tests, certifies and bundles many popular third party hardware and software products with OSS hardware for ease of use and guaranteed operation. OSS 
encourages customer innovation by combining OSS products in new and interesting ways with third party and customer developed hardware and software. 
Unfortunately, with virtually infinite combinations of hardware and software, OSS cannot test and validate every possible configuration. OSS is committed to 
supporting its products and identifying if any technical issue may be related to third-party hardware or software. In order to isolate technical issues, OSS may 
request that the system be returned to the same configuration that shipped from the OSS factory and any non-OSS supplied third-party hardware or software be 
removed from the system during troubleshooting.  

We test, certify and support many third party hardware and software products along with OSS hardware and are happy to integrate a fully supported system.  Ask 
us about that service and we would be happy to help. If an OSS product is fully functional and a support issue is related to third-party hardware or software that did 
not ship from the OSS factory,  the customer requesting support should reach out to the third-party vendor for assistance to fully troubleshoot the issue.  

 

16.4 

Online Support Resources 

As a product user and customer, listed below are our Online Support Resources 

https://www.onestopsystems.com/support

  provides Knowledgebase Articles such as troubleshooting methods, compatibility, FAQ, 

documentation, and product technical information. 

Содержание EB4400 5-SLOT Gen4







































































Отзывы: