OSRAM GmbH
Kunden Service Center
Customer-Service-Center (CSC)
Steinerne Furt 62
86167 Augsburg
Germany
Tel : +49 (0) 1803 677 - 200
(kostenpflichtig / charges apply)
Fax.: +49 (0) 1803 677 - 202
www.osram.com
www.osram.de
40083210531524
4008321053152
Page 1 of 2
Remote control
Operating instructions
III 2009
DALI_EASY_RMC_ba0903en_we1.01.indd
DALI EASY RMC
ON
1 2 3 4
DIP
B
D
F
C
A
E
F
Ch 1
Ch 2
Ch 4
Start
Time +
Stop
Time -
Ch 3
Sc
en
e 2
Sc
en
e 1
Sc
en
e 3
On
/O
ff
Dim
min
g
Sc
en
e 4
Description
Function and application
The DALI EASY RMC remote control in conjunction with an inf
-
rared receiver is used for the adjustment and functional control
of the DALI EASY I
I
I and OT EASY 60
II
control units.
Function
The remote control sends digital coded infrared signals to the
DALI EASY IR infrared receiver. The receiver converts the
digital coded infrared signals into the corresponding telegrams
and transmits them to the connected control units.
Design
The DALI EASY RMC remote control is made up of the follow
-
ing components:
•
Infrared transmitter (A)
•
Display (B)
•
Function buttons (C)
•
Battery compartment (D)
• DIP switch (E)
•
Housing (F)
Button functions
Button
Function
CH 1...
CH 4
The luminaires of a group (channels 1...4) are
switched on and off (short press) and their bright
-
ness is changed (long press).
Start/
time +
The sequence is started (short press) or the fade
time is extended (long press).
Stop/time - The current sequence is stopped (short press) or
the fade time is shortened (long press).
Scene 1 to
Scene 4
The corresponding scene is called up (short press)
or stored (long press).
On/Off
Dimming
All luminaires are switched on and off (short press)
and their brightness is changed (long press).
Displays
Display
Meaning
Description
Sequence
The sequence mode was
started.
Hold
The sequence mode or
daylight simulation was
stopped.
Scene 1…4
The scene was called up.
Daylight scene
1...4
The daylight simulation
scene was called up.
Daylight
sequence
Daylight simulation was
started.
Learn
IR sequence
IR coding is transmitted.
Command is transmitted.
Function is disabled or not
available in the activated
operating mode.
