Osram AM356960031, Инструкция по применению

Страница: 28 / 60

28
Firmware Update
8 Firmware Update
In case a new firmware version is available, use the web interface of the
e:cue Bridge8 to update the device.
1. Save the new firmware file from www.ecue.com.
2. To access the web interface, open a common web browser on a
connected PC. Enter the e:cue Bridge8's IP address into the address
bar:
e.g. http://192.168.123.1.
3. On the left side, select “Settings” and click the “Firmware update”
button at the end of the page. The device enters the bootloader mode
and the firmware loader window is displayed:
4. Browse for the new firmware file and click “upload” to start the
updating process. Wait until the process has finished to get back to
normal operation. Acknowledge the firmware version and the Dashboard
page appears.
The firmware update is completed.
To abort the firmware update, click “abort and restart”. Wait for the device
to reboot.
3.