Page
17
of
59
HDMI OUTPUT SOURCE
Be default the HDMI output on the rear of the Talon displays the signal from the HDMI input. Here you may select
any other source and display it on the HDMI output for monitor purposes. This selection can be changed while
Talon is encoding without effecting the streaming output.
NETWORK
NETWORK CONFIGURATION
DHCP
By default, Talon is set to receive an IP address automatically via DHCP.
STATIC IP
If you do not wish to use DHCP you may uncheck the box and assign a static address manually. Be certain that the
static IP you set is valid before rebooting. Failure can cause Talon to become inaccessible to the web UI. When that
occurs, you can use Talon’s wireless access point to reset the
address or use the reset button on the front of the
device to restore the system to original default settings.
Содержание Talon PRO
