ADAPT 600 - INSTRUCTIONS
1.
SEAT HEIGHT
2. BACK ANGLE
3. FREE FLOAT ACTIVATION
Lift the middle lever on the right-
hand side and take your weight off
the seat to raise the height. Remain
seated to lower the height. Release
the lever to lock the seat height.
To adjust the angle of the backrest,
lift the rear lever on the right-hand
side and lean the backrest to the
desired position. Return the lever to
the downward position to lock the
backrest in place.
Lift the forward-most lever on the
right-hand side to activate the free
float. Lower the lever to lock the seat
in to position.
4. BODY WEIGHT TENSION
5. BACK HEIGHT
6. LUMBAR SUPPORT
To adjust the body weight tension, twist
the knob on the right hand side. Rotate
clockwise to increase the tension,
rotate anti-clockwise to reduce the
tension.
To adjust the height of the backrest,
grasp the bottom of the backrest
and raise to the desired height. To
allow the backrest to be lowered
again, raise the backrest all the way
to the top and lower it to its lowest
position.
As you are sitting on the chair
squeeze bulb, located underneath
the left-hand side of the seat,
repeatedly to inflate the lumbar
support. Press the button on the
bulb to deflate the lumbar support.
