Call
Call
Call
Call 0800 002 9533 or
0800 002 9533 or
0800 002 9533 or
0800 002 9533 or visit www.osmiowater.co.uk
visit www.osmiowater.co.uk
visit www.osmiowater.co.uk
visit www.osmiowater.co.uk
Ecopure Eco
Ecopure Eco
Ecopure Eco
Ecopure Eco----8
8
8
8 Water Filter Installation Instructions
Water Filter Installation Instructions
Water Filter Installation Instructions
Water Filter Installation Instructions
This tutorial explains how to fit the Ecopure Eco-8 filter.
The Ecopure Eco-8 is designed to filter all the water supply a cold water tap or refrigerator and any
cold water 15mm pipe.
Fitting your new filter
Fitting your new filter
Fitting your new filter
Fitting your new filter
First you need to turn off your cold water supply and drain down by turning on the taps. If you are
unsure, then get a qualified plumber of handyperson to come in and do the job.
The in and out fittings are 15 mm ‘push fit’ fittings so ensure that you use push any 15 mm (copper
or plastic/speedfit) pipe. You need to cut your cold water 15mm copper pipe and place the filter
into the gap - so that it sits "in-line".
It is recommended to fit a small length (about 6-10cm) of copper pipe to fit to the compression
fitting on a flexible hose as shown below.
This makes filter changes much easier.
