Page 22
Metor 900M
P/N 101023281
Installation and Operating Manual
Rev. 0.5
Rapiscan Systems Proprietary Information
6.3 Users Menu
Item
Possible
values
Default
setting
Description
CHANGE
PASSWORD
-
-
Change SUPERUSER or USER password.
6.4 Random Menu
Metor 900M has three random alarm generators. The generators can be individually
configured and can be simultaneously in operation. All generators have same parameters.
Item
Possible
values
Default
setting
Description
RND1 SOURCE
NO ALARM
ALARM
NO ALARM
Selects whether random alarms are generated for non-
alarming or for alarming passengers.
Alarming passenger means a passenger that carries
metal items causing an alarm when passing through the
unit.
In case a random alarm is generated for an alarming
passenger normal alarm is not activated.
RND1 RATE
0 - 100
0
Random alarm rate target value in percentages.
When value is 0 no random alarms are generated.
RND1 TONE
1 - 5
2
The audible alarm tone used for a random alarm.
Same selection of tones is available as for normal
alarms.
RND1 VOLUME
0 - 9
5
The audible alarm volume used for a random alarm.
Same selection of volumes is available as for normal
alarms. When value is 0 alarm is muted.
Random volume cannot be less than value set by
ALARM VOL MIN parameter.
RND1 DISPLAY
TEXT
SIGNAL
TEXT
TEXT: display shows text “random 1 alarm” when a
random alarm is generated.
SIGNAL: display shows same information during
random alarms as during normal alarms.
