P/N 92109435
Metor 6E
Page
13
Rev. 2
Installation Quick Guide
4
STARTUP AND SHUTDOWN
Metor 6E is turned on and off from
the power switch on the main
electronics inside the cross piece.
To access the switch open the cross
piece hatch with the key provided.
The unit can be switched to standby
without the need to open the cross
piece hatch by enabling the standby
feature from the user interface, refer
to chapter 7.7. Standby is turned on
and off with button
<C>
on the
keypad. During standby all displays
and lights are off and metal detection
is disabled with magnetic field
generation turned off.
After switching on Metor 6E runs a
self-test.
Also all lights are turned on briefly.
During the self-test software versions
of the unit will shown as illustrated on
the left:
- User interface version
- Display unit SW version
- Electronics SW version
In the end selfcheck result is shown.
SW versions may differ from the
ones displayed.
CAUTION
When using the maximum setting for the audible alarm the volume is exceeding 90 dBa
at distances less than 1 m.
Rapiscan Systems Proprietary Information
