SECTION 4 - MACHINE OPERATION
31215048
4-11
Traveling on a Grade
When traveling a grade, maximum braking and traction are obtained
with the boom stowed, in position over the rear (drive) axle, and in
line with the direction of travel. Drive the machine forward when
climbing a grade, and in reverse when descending a grade. Do not
exceed the machine's maximum rated gradeability.
IF THE BOOM IS OVER THE FRONT (STEER) AXLE, DIRECTION OF STEER AND DRIVE
MOVEMENT WILL BE OPPOSITE FROM THE MOVEMENT OF THE CONTROLS.
4.5
STEERING
Position thumb switch on Drive/Steer controller to
Right for steering right, or to Left for steering left.
4.6
PLATFORM
Platform Level Adjustment
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANTS TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
To Level Up or Down - Position the Platform/Level
control switch Up or Down and hold until the plat
-
form is level.
Platform Rotation
To rotate the platform to the left or right, use the Plat
-
form Rotate control switch to select the direction and
hold until the platform is level.
Figure 4-5. Traveling on a Grade
To
order go
to
Discount-Equipment.com
