manualshive.com logo in svg

Oshkosh JLG 520AJ, Руководство по эксплуатации и безопасности

Поделиться
Скачать
Oshkosh JLG 520AJ Скачать руководство пользователя страница 31

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION

3121664

– JLG Lift –

2-5

11.

Function Check

 – Once the “Walk-Around” Inspection is

complete, perform a functional check of all systems in an
area free of overhead and ground level obstructions. Refer to
Section 4 for more specific operating instructions. 

IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE MACHINE IMMEDI-
ATELY! REPORT THE PROBLEM TO THE PROPER MAINTENANCE PERSONNEL. DO NOT
OPERATE THE MACHINE UNTIL IT IS DECLARED SAFE FOR OPERATION.

Function Check

Perform the Function Check as follows:

1.

From the ground control console with no load in the plat-
form:

a.

Check that all guards protecting the switches or locks
are in place;

b.

Operate all functions and ensure proper operation;

c.

Check auxiliary descent and ensure proper operation;

d.

Ensure that all machine functions are disabled when
the Emergency Stop Button is pushed in.

e.

Ensure all boom functions stop when the function
enable switch is released.

Содержание JLG 520AJ

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды