SECTION 4 - MACHINE OPERATION
4-24
31215066
Stowing/Swinging the Jib
To swing the jib for stowage or machine usage,
use the Jib Stow control to select Right or Left
direction. The jib lock pin will also operate auto
-
matically while using the Jib Stow switch.
4.11 FUNCTION SPEED CONTROL
This control affects the speed of main boom
telescope, jib telescope, and jib lift. Turning the
knob all the way counterclockwise until it clicks
puts drive, main lift, platform rotate, and swing
into creep mode.
4.12 MACHINE SAFETY SYSTEM OVERRIDE (MSSO)
(CE ONLY)
The Machine Safety System Override (MSSO) is
used to override function controls for Emergency
Platform Retrieval only. Refer to Section 6.5,
Machine Safety System Override (MSSO)(CE Only)
for operating procedures.
4.13 SKYGUARD™ OPERATION
SkyGuard provides enhanced control panel protection. When the
SkyGuard sensor is activated, functions in use at the time of actu
-
ation will reverse or cutout. The SkyGuard Function Table pro
-
vides more details on these functions.
During activation, the horn will sound and, if equipped with a
SkyGuard beacon, the beacon will illuminate until sensor and
footswitch are disengaged.
If the SkyGuard sensor remains activated after function reversal
or cutout, depress and hold the SkyGuard Override Switch to
allow normal functions until the sensor is disengaged.
Consult the following illustrations to determine which type of
SkyGuard the machine has and how it is activated. Regardless of
type, SkyGuard function according to the SkyGuard Function
Table does not change.
To
order go
to
Discount-Equipment.com
