Oshkosh JLG 1043, Инструкция по эксплуатации и безопасности

Страница: 67 / 254

Section 3- Controls and Indicators
3 - 17 31211368
Gear Selection
Gear selection is located on the twist grip handle of transmission control lever.
• Twist hand grip to select gear.
• The Transmission is equipped with four forward and three reverse gears.
• Select appropriate gear for task being performed.
Use a lower gear for transporting
a load. Use a higher gear only when driving unloaded for longer distances.
• Slow down prior to downshifting. Do not downshift more than one gear at a time.
Note: If utilizing the automatic transmission shifting feature, operation of the gear selection
will change.
• If first or second gear is selected, transmission remains in the selected gear.
• If third gear is selected, transmission automatically shifts between second and third
gear based on vehicle speed and throttle position for optimal performance.
• If fourth gear is selected, transmission automatically shifts between second, third and
fourth gear.
The Automatic Transmission Mode indicator (see page 3 - 8) will illuminate if any of the
following conditions are present.
• Operator has selected third or fourth gear using gear selection.
• The actual gear is greater than the selected gear.
OD0180
1st
2nd
3rd
4th
https://www.forkliftpdfmanuals.com/