Oshkosh JLG 1043, Инструкция по эксплуатации и безопасности

Страница: 53 / 254

Section 3- Controls and Indicators
3 - 3 31211368
1. Transmission Control Lever:
See page 3 - 16.
2. Instrument Panel: See page 3 - 4.
3. Steering Wheel:
Turning the steering wheel to the left or right steers the machine in
the corresponding direction. Three steering modes are available. See “Steer Modes”
on page 3 - 25.
4. Horn: Press to sound horn.
5. Frame Level Indicator:
Enables operator to determine the left to right level
condition of the telehandler.
6. Charts/Display/Monitor:
a. Capacity and Maintenance Charts (if equipped): See Section 5- Attachments or
Section 7- Lubrication and Maintenance.
b. Multifunction Display (if equipped): See page 3 - 32.
c. Reversing Camera Monitor (if equipped): See page 3 - 30.
7. Accessory Control lever (if equipped): See page 3 - 18.
8. Right Dash Control Panel:
See page 3 - 12.
9. Joystick: See page 3 - 22.
10. Left Dash Control Panel:
See page 3 - 10.
11. Service Brake Pedal: Further pedal is pressed, the slower the travel speed.
12. Ignition Switch:
Key activated. See page 3 - 14.
13. Accelerator Pedal: Pressing down the pedal increases engine and hydraulic speed.
14. Frame Level Switch:
Controls left to right frame level of machine. Press right side of
switch to rotate frame right; press left side of switch to rotate frame left.
15. Outrigger Levers (if equipped):
See page 3 - 19.
16. Air Shutoff Valve (ASOV) Test Switch (if equipped): See page 8 - 2.
17. LSI Indicator (if equipped):
See page 3 - 20.
https://www.forkliftpdfmanuals.com/