Oshkosh Corporation JLG ES1330L, Руководство по эксплуатации и безопасности

Страница: 52 / 98

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-20
31217186
3.14 MACHINE LIFTING AND TIE DOWN
Lifting
The machine may be lifted using a forklift truck. Lift only using the
built-in forklift pockets on the side of the machine and only with the
platform in the stowed position. First adjust the width of the lifting
tines to fit the machine forklift pockets (
1
,
2
). Then slide the lifting tines
into the forklift pockets and carefully lift machine.
The machine can also be lifted using a spreader bar and four equal
length straps or chains capable of supporting the full gross weight of
the machine. Lift only using the two lift lugs at the rear of the frame and
the two tie-down/lift lugs at the front of the machine.
*
)
0"%
0"%