SECTION 4 - CONTROL COMPONENTS
31215825
4-11
Power Selector/EStop Switch Installation
1.
Emergency Stop Button
4.
Nut
2.
Button Seal
5.
Emergency Stop Switch
3.
Square Lock Washer
6.
Switch Lock/Release Lever
Note:
Tighten nut enough to keep button from turning
Reattach wires to same terminals on new switch.
1.
Nut
2.
Power Selector Switch
3.
Align and insert tab on switch into slot on cover.
Note:
Re-attach wires to the same terminals on new switch.
1
2
4
5
6
1
2
3
1.
LCD and Button Circuit Board
2.
Emergency Stop Switch Connector
3.
Main Power Selector Switch Connector
Note:
To release switch connectors, push tab on top of
connector.
2
3
1
Figure 4-17. Emergency Stop Switch Installation
Figure 4-18. Power Selector Switch Installation
Figure 4-19. Power Selector/EStop Switch - Connectors
Go to
Discount-Equipment.com
to
order your
parts
