OSBY 1200, Руководство пользователя

Страница: 18 / 30

MANUAL FÖR INDBYGGBANDUGN IU80-60VRP – Sid. 18
It is an electronic timing module enabling your food you have put in the oven to be
ready for service at any time you like. The only thing you need to do is to programme the
cooking time of the food and also the time when you would like your food to be ready.
It is also possible to use a minute-programmed alarm clock independent from the oven.
The case where the time clock is behind or ahead is not a malfunction. The oven time
clock may be put back or ahead according to mains frequency as it runs directly with
mains voltage. This is not a malfunction.
POWER ON
At power on, oven is inactive, time of day and symbols are flashing. The indicated
time of day is not correct and has to be adjusted. Press button 4 seconds to activate
the oven and proceed adjusting the time of day as below.
TIME OF DAY ADJUSTMENT
Time of Day adjustment is only possible when no cooking program is in progress.
Press the button to enter the setting mode, then the dot symbol between the hour
and minute digits starts to flash. Using either and adjust the desired duration. The
maximum adjustable duration is 23h 59 minutes. Adjustment mode will be abandoned
within 6 seconds after the last button press or can be terminated immediately by
pressing the
button.
Note: Time of day adjustment is also activated in first 7 seconds after power on.
SETTING THE MINUTE MINDER
With this function, you can adjust a duration in minutes. After the adjusted time has
been elapsed, an alarm sound will be produced.
Press button once to enter the minute minder adjustment mode, symbol will
start flashing on the screen. Using either or , adjust the desired duration. The
maximum adjustable duration is 10 hour. Adjustment mode will be abandoned within
6 seconds after the last button press or can be terminated immediately by pressing
the
button.
CANCELLING THE ALARM BUZZER SOUND
Once the adjusted minute minder duration is elapsed, the buzzer alarm will start to
sound, accompanied by the flashing symbol on the screen. Any button press will
stop the alarm sound and this indication. If no button is pressed, the alarm sound will
end automatically after 5 minutes, but the flashing symbol will go on.
2