Volta Pellet Stove Installation and Operation Manual
__________________________________________________________________________________________________ 99
APPENDIX C: OPTIONAL BATTERY HOLDER KIT (AC01452) AND 24V (2X
12V) BATTERY KIT (AC01454)
WARNINGS
FOLLOW THE MANUFACTURER'S INSTRUCTIONS FOR TESTING, JUMPING, INSTALLING,
DISCHARGING, CHARGING, EQUALIZING AND MAINTAINING BATTERIES.
ALWAYS USE BATTERIES OF IDENTICAL MAKE, MODEL AND WITH THE SAME MANUFACTURING
DATE.
MAKE SURE THE BATTERY CABLE IS NOT UNDERSIZED FOR THE BATTERY SYSTEM.
MAKE SURE THE BATTERY CABLES ARE CONNECTED TO THE TERMINALS CORRECTLY. IF UNSURE,
PROFESSIONAL ASSISTANCE IS RECOMMENDED.
NEVER MOVE THE BATTERIES FROM THEIR ORIGINAL POSITION.
DO NOT SHORT-CIRCUIT THE BATTERIES.
DO NOT CHARGE WITHIN A SEALED HOUSING.
WHEN USING AN AUXILIARY BATTERY SYSTEM OTHER THAN THE OF THE STOVE’S
MANUFACTURER, ALWAYS USE THE CONNECTOR OF THE UNIT PROVIDED BY THE
MANUFACTURER AND MAKE SURE THAT THE BATTERIES ARE LOCATED BEYOND THE MINIMUM
CLEARANCES TO COMBUSTIBLES.
EXERCISE CAUTION WHEN WORKING WITH METALLIC TOOLS OR CONDUCTORS, TO PREVENT
SHORT CIRCUITS AND SPARKS. MAKE SURE THAT THE BATTERY TERMINALS ARE ALWAYS
SHIELDED.
INSTALLATION
The optional battery holder kit (AC01452) is designed to be installed above the DC Mother Board, on
the back of the stove. Refer to the installation guide supplied with the accessories to proceed to the
installation. If you don’t use the support provided by the manufacturer, you must install your
batteries in a cool and dry place and beyond the minimum clearances (see
Section 3:
Clearances to
combustible material
).