Volta Pellet Stove Installation and Operation Manual
__________________________________________________________________________________________________ 55
To validate the status of a component, you need to go to the “TROUBLESHOOT” page from the Main
Status Page. Once there you will be able to navigate with the arrows at the bottom page.
Access to
program
Page 1 provides information on the software version of the stove's two electronic cards. In addition,
you have the total number of hours your stove has been in operation, the temperature of the exhaust
gases and the maximum temperature that your stove has reached.
Pages 2 and 3 will give you statistics on the number of times a specific error message has occurred.
From page 4 is the list of operating states of the electronic components. If the square is green, it
means that the operating state of the component is normal, no matter if it's on the left column or
right. If the square is red, it means that there is a security function in operation. For example, if the
stove is off, it is supposed to be cool. If the stove is off but the temperature probe is warm, the auger
motor 2 and the exhaust blower will be running. This screen will give you the operating status in real
time, meaning that when the stove is running, if a state change occurs, you will see it immediately.
WITH GREEN ICONS
The signal sent to the gear motor 1 is open so the motor
doesn’t turn. This state is normal.
The signal sent to the gear motor 2 is closed so the motor
turns. This state is normal.
WITH RED ICONS
The signal sent to the gear motor 2 is closed so the motor
turn. This state shows that there is a security element that
prevents it from stopping.
VX.XX(X)
VX.XX
X:XX:XX
XX°F
XX°F
X:XX:XX
