Osburn Horizon OB04010, Инструкция по установке и эксплуатации

Страница: 16 / 80

16 HORIZON – Installation and Operation Manual
3.1.6 Judging firewood moisture content
You can find out if some firewood is dry enough to burn by using these guidelines:
•
Cracks form at the ends of logs as they dry;
•
As it dries in the sun, the wood turns from white or cream colored to grey or yellow;
•
Bang two pieces of wood together; seasoned wood sounds hollow and wet wood sounds dull;
•
Dry wood is much lighter in weight than wet wood;
•
Split a piece, and if the fresh face feels warm and dry it is dry enough to burn; if it feels damp, it is too
wet;
•
Burn a piece; wet wood hisses and sizzles in the fire and dry wood does not.
You could buy a wood moisture meter to test
your firewood.
3.2 Manufactured logs
Manufactured logs made of 100% wood residues
can be burn in your fireplace. However, they must
be used carefully. Therefore, you cannot place a
large quantity of such logs into your fireplace.
Manufactured logs typically release a much larger
heat output over a short period of time. Start with
one log and see how the fireplace reacts. You can
increase the number of logs burned at a time to a
maximum of three. Burning more than three
manufactured logs at one time can overheat and
damage your stove.
CAUTION
• DO NOT BURN ANY MANUFACTURED LOGS CONTAINING CHEMICAL ADDITIVES. YOU MAY
OVERHEAT YOUR FIREPLACE, THEREFORE CAUSING A FIRE HAZARD AND VOIDING YOUR
WARRANTY.
• DO NOT POKE OR STIR THE LOGS WHILE THEY ARE BURNING.
•
USE ONLY FIRELOGS THAT HAVE BEEN TESTED FOR USE IN FIREPLACES (SEE ULC/ORD-C127,
COMPOSITE FIRELOGS) AND PRIOR TO USE, REFER TO FIRELOG WARNINGS AND CAUTIONS
MARKINGS ON PACKAGING.