Oryx solutions SCA 1200ht, Руководство пользователя, Страница: 9 / 26

9
The Power Cord (not shown in figure) is used to connect the system to a wall outlet for
power. Only use a power cord provided by the manufacturer.
The Power Cord Receptacle is where the power cord is connected to the unit. The plug
is a disconnecting device and should be easily accessible at all times.
The Drain Tube and Drain Valve are on the front of the tank for easy accessibility.
The tank is drained by connecting a hose to the Drain Tube and turning the Drain Valve
to the open position. The liquid in the tank should be at room temperature and the unit
should be turned off and unplugged from the wall before it is drained.
Control panel
1 Up/Down Arrows (Add/Subtract Time)
2 Set Timer
3 Start/Pause
4 No heat Selection
5 Temperature Selection
6 Silence Alarm
7 Alert Indicator
8 Low Water Level Indicator
9 High Water Level Indicator
10 Temperature LED Display
11 Pump Operating LEDs
12 Progress LEDs
13
Time Remaining LED Display
Figure 5 Control Panel