Oryx solutions SCA 1200ht, Руководство пользователя, Страница: 18 / 26

18
Inspecting and cleaning the pump intake screen
The pump intake screen may become clogged with debris. This will noticeably reduce
the flow in the tank.
Remove the intake screen by pulling down with sufficient force to unseat the fastening
clips from the mating surface. Scrub debris from the intake screen using a stiff brush.
Rinse with water. Verify all holes are unplugged before replacing the screen on the
pump intake.
Moving the SCA
Always use two people to lift the SCA. The SCA should always be drained before moving.
To lift, have each person stand on either side of the unit and place their hands into the
indentations under the unit. Lift the unit to a cart or wheeled table for transport.
Figure 10 Removing Pump Intake Screen