manualshive.com logo in svg

Ortopedia solero 9.072, Руководство по эксплуатации

Поделиться
Скачать
Ortopedia solero 9.072 Скачать руководство пользователя страница 45

45

Height adjustment

The support castors are height adjust-
able.

After loosening the clamping screws
(fig. 54/ 

➀

) position the tube of the

support castor (fig. 54/ 

➁

) in accord-

ance with the drive wheel.

Tighten the clamping screw (fig. 54/

➀

).

Correct support castors length

The support castors must reach further
out than the drive wheels in order to
achieve a sufficient support function.

!

Attention:

For sufficient tilting stability both
support castors are to be posi-
tioned at the same height.

•

To increase the tilting stability nev-
er drive without the support cas-
tors swivelled to the rear.

•

Have the function checked by the
specialist dealer after each change
to the seat height and wheel size!

☞

Note:

Observe the brochure < 

safety in-

structions for mechanical wheel-
chairs

 > the chapters < 

driving up-

hill, overcoming obstacles

 > as well

as < 

driving on elevators, lifting

platforms and escalators

 >!

54

1

2

Содержание solero 9.072

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды