background image

27

26

16

17

3.3.4

Leg supports

!

Warning:
Do not use the leg supports to lift or
carry the wheelchair.

• For the Impuls XX model with sepa-

rate leg supports, the maximum per-
missible user weight is reduced to 130
kg!

3.3.4.1 Calf support

The calf support (Fig. 15/

 ➀

) is pushed

on to the retaining pin on the leg sup-
port. The calf support can be adjusted
to the required length using the Velcro
fastening on the rear side of the sup-
port.

3.3.4.2 Folding up the foot

plates

Locking the brakes prevents the wheel-
chair from unintentional movement.
Remove the calf support and lift both
feet from the foot plates.
To keep the foot area free, e.g. for "pro-
pelling" (moving the wheelchair for-
wards using the feet), the foot plates
should be folded to the side (Fig. 16).

15

1

12

1

3.3.3.3 Armrest with double

locking

To install the armrest, push the diago-
nally positioned rear pin (Fig. 12/

  ➀

)

into the corresponding opening, then
swivel it forwards into the correspond-
ing opening until you hear the locking
button click into place.

Note:
When the armrest is swivelled for-
ward, the rear lock (Fig. 12/

  ➀

) is

automatically engaged.

To remove the armrest, press the lock-
ing button (Fig. 13/

 ➁

) swivel the front

of the armrest free and pull upwards.

!

Warning:
When supporting yourself on plastic
armrests, place your hands over the
central column (Fig. 13).

3.3.3.4 Height-adjustable arm-

rest

To adjust the height, push in the ratchet
button (Fig. 14/

 ➀

) and bring the arm-

rest pad in stages to the desired height.
To adjust the armrest height on the
Impuls XX, push the ratchet button (Fig.
14.1/

 ➀

).

13

2

14

1

14.1

1

Содержание Impuls 1


































Отзывы: