Orthogonal Devices ER-102, Руководство пользователя, Страница: 2 / 16

3.3.2 The High vs Low Transforms . . . . . . . . . . . . . . 10
4 Recording 11
4.1 Real-time mode . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1.1 Smooth in, Stepped out . . . . . . . . . . . . . . . . . 13
4.2 Step mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3 Alter mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5 Memory Card 15
5.1 Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.2 Updating the rmware . . . . . . . . . . . . . . . . . . . . . . 15
6 Notes 16
6.0.1 need more examples throughout the manual . . . . . . 16
1 Introduction
1.1 What does it do?
The ER-102 Sequencer Controller is an expander for the ER-101. It's main
purpose is to place various key aspects of the ER-101 under external voltage
control. These key aspects are control of the play cursor, real-time modula-
tion of step parameters, and the recording/alteration of sequences.
1.2 The Interface
1.3 The Math Transforms
Throughout this manual, you will encounter two types of transforms, de-
structive and non-destructive. A destructive transform permanently alters
the stored parameters of the target steps. These destructive transforms are
always accessed via the MATH button. A non-destructive transform alters
step parameters as they are being interpreted during playback but without
changing their stored values. You will nd non-destructive transforms in the
GROUP MODIFIER section of the ER-102's interface.
All transforms share the following interface:
2