4 ADJUSTMENTS
Inc. All rights reserved
34
4.5.2. CHANGING THE FRONT WHEEL MODEL OR HEIGHT
1. Remove the screw (
A
) and nut (
B
) (1/2 in. open-end wrenches) that hold the wheel
to the fork (see Figure 14-A);
2. Remove the wheel from the fork;
3. Remove the spacers or washers from the wheel assembly;
4. Select a wheel size and place the bolt in the appropriate hole;
5. Reverse the procedure to reassemble the wheel.
NOTE:
Refer to Table 1 of Section 4.4.2 for the height options.
Figure 14-A: Changing the front wheel model or height.
SPACERS
(B)
(A)
FORK
