manualshive.com logo in svg

Orthman 125-087-02-EN-OM, Руководство оператора, Страница: 16 / 62

Поделиться
Скачать
Orthman 125-087-02-EN-OM Скачать руководство пользователя страница 16

SAFETY INFORMATION

DR12x2 Row Hopper Planter OM-EN 

2-8

No Riders

WARNING

!

Never allow riders on the tractor or implement. Failure to 
follow this information could result in death or serious 
injury.

Riders hinder operator visibility and can be thrown from 
the implement and/or be struck by foreign objects 
resulting in injury or death.

Practice Safe Maintenance

Proper maintenance is your responsibility. Maintenance 
neglect and/or poor maintenance practices can result in 
injury or death. Always use the proper tools to maintain 
the implement.

DANGER

!

Avoid crushing. Failure to follow this information will 
result in death or serious injury. Make sure all personnel 
are clear of the implement before lowering.

Lower the implement to the ground, place the tractor in 
park, turn off the engine, and remove the key.

DANGER

!

Avoid crushing. Failure to follow this information will 
result in death or serious injury. Use bar stands and 
cylinder stops to support the implement. 

Store the implement on a clean, dry, level surface. An 
uneven surface could cause the implement to shift or fall, 
resulting in injury or death as well as implement damage. 
Securely support all implement components that must be 
raised. Store the implement away from human activity.

DANGER

!

Avoid entanglement. Failure to follow this information 
will result in death or serious injury. Never lubricate or 
service the implement when in motion.

Keep away from power driven parts when in motion. 
Disengage power sources prior to maintaining the 
implement. Injury or death can result from contact with 
power driven parts when in motion.

DANGER

!

Avoid crushing. Failure to follow this information will 
result in death or serious injury. Do not stand between 
the tractor and implement when connecting or 
disconnecting the implement.

Always place the tractor in park and turn off the engine 
before connecting or disconnecting the implement. Injury 
or death can result from being trapped between the 
tractor and implement.

DANGER

!

Avoid high-pressure fluid hazards. Failure to follow this 
information will result in death or serious injury. Relieve 
hydraulic pressure before servicing or disconnecting 
hoses.

Escaping pressurized hydraulic fluid can penetrate the 
skin, resulting in injury or death. Relieve hydraulic system 
pressure before connecting or disconnecting the tractor.

Never use hands to check for hydraulic leaks. Use 
cardboard or wood. Wear protective gloves and safety 
glasses or goggles when working with hydraulic 
systems. If an accident occurs, see a doctor 
immediately for proper treatment.

Never operate a combustion engine in an enclosed area. 
Make sure there is adequate ventilation. Exhaust fumes 
can cause asphyxiation.

Service tires safely. Tire and rim separation can result in 
serious injury or death. Do not over inflate tires. Only 
mount or dismount tires if you possess the proper 
equipment, otherwise contact a trained professional. 
Always maintain correct tire pressure. Inspect tires and 
wheels daily. Do not operate tires with inadequate 
pressure, cuts, visible damage, or missing hardware.

CAUTION

!

Be extremely careful working around unshielded sharp 
edges. Injury may result from contact with sharp edges.

Keep all parts in good condition and properly installed. 
Replace damaged or missing parts immediately.

Remove tools and unused parts prior to implement 
operation.

Содержание 125-087-02-EN-OM































































Отзывы:

Нет отзывов