ORTEC RADEAGLET, Руководство пользователя

Страница: 20 / 60

The EASY ID MODE graphic is surrounded by other measurement information including:
• a countdown timer
• a display of the dose rate
• a display of the current count rate
The automatic acquisition will stop, after the countdown timer finished. The analysis results will then be
displayed. The user can manually trigger an immediate analysis by pushing the
ANALYZE button located
in the center.
Pressing the DOSE button will lead you back to the DOSE RATE MODE .
Figure 12: EASY-ID MODE
2.7.2 Nuclide Identification Result in Easy Mode
Once the countdown timer reaches 0, or after the user has pressed ANALYZE , the instrument will display
the ID results in a dedicated nuclide ID screen (please refer to Figure 13 , p. 21 ).
The result of the identification is composed of following information:
• Nuclide name in short form, such as
Cs137
• Category: Naturally occurring radiation (NORM), industrial emitter (IND), medical source (MED) or
special nuclear material (SNM)
• Severity: Threat, Suspicious or Innocent which is also indicated via the colored box.
Page 20 of 60 RADEAGLET User Manual• Software 2.1.16 • Document 1.32o • 2017-12-15 © innoRIID GmbH