WARNING
LED
Back Lit Panels
MODEL
OD347-
2
X
4
D
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or
use of this product, consult a competent electrician.
INSTALLATION GUIDE
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY
A QUALIFIED
ELECTRICIAN.
1.
LED
Back Lit Panels
are suitable for using in
dry and damp
location
s
2.
Please keep the LED
Back Lit Panels
a
way
from any corrosive substance, and
please
use
dry
cloth
when you clean it
3.
LED
Back Lit Panels
can only be installed by a qualified electrician
4.
Before installation or maintenance, please disconnect the power to prevent electric shock
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
CAUTION
Recessed Installation
1)
2
)
3)
4)
1) Remove the ceiling tile at an
appropriate location where the
product is to be installed and
raise the product above the bar
2) With power turned OFF at the
2)
breaker, connect power to
2)
driver based on
2)
wiring diagram
3) Fix the product protection
3)
bracket above the T-bar and
3)
insert the luminaire into
3)
the panel
4) Adjust appropriate
4)
orientation and
4)
complete the
4)
installation
Surface Mount
Installation
(pt.1)
1)
2
)
3)
1) Fix A1 / A2 / B1 / B2 by
screws, making it a
complete frame
2) Then fix A1 / A2 / B2 at the ceiling
2)
and screw off B1
3) Embed part of the luminaire into the
3)
ceiling mounting equipment.
3)
With power turned OFF at the
3)
breaker, connect power to driver
3)
based on the wiring diagram
