ORTAL Clear 200, Инструкция по установке и эксплуатации

Страница: 83 / 156

83
Working with Glass Panels
5mm ceramic glass front and side panels are provided. Contact ORTAL for replacement parts if required. 3/16
tempered glass exterior panels can be serviced locally.
Silicon comes pre-applied to any glass-to-glass connections (LS, RS, TS and SC models), on both sides of the glass.
Keep the following guidelines in mind when handling silicon and glass panels:
x
The purpose of the silicon is to create a seal. When placing glass panels, ensure that the glass is fully in
place and that the silicon is filling the space between the glass panels. Place the front (or center) panel
in place first and then slide the side panel into place so that the silicon edge touches the glass edge.
Figure 16: Glass Seal Assembly Diagram
x
Re-apply silicon only if the original silicon is damaged. Contact ORTAL if silicon is needed.
x
If new silicon is applied, cure time is 24 hours before operation of the fireplace.
x
Do not use silicon to seal the glass after it is in place.
Always use appropriate materials and cleaning agents to clean glass. Ammonia-free glass cleaners and/or ceramic
glass cleaners are recommended.