ORTAL Clear 200, Инструкция по установке и эксплуатации

Страница: 129 / 156

129
Post-installation Procedures
The following sections present post-installation operations.
Initial Burning Period
Following installation of an ORTAL fireplace, there is a 12-hour minimum burning period. This 12-hour period
must include a minimum of 4 hours of continuous burning.
During this time, the customer/installer may notice:
x
The glass developing a white or “cloudy” film
x
An unusual smell
Both the film and the smell are due to the paint on the fireplace metal heating and “burning off”. This is normal.
The cloudiness and odor will disappear after the 12-hour period elapses and the installer returns to service the
fireplace and complete startup.
Final Inspection Procedure
When the 12-hour burning period is complete, the installer returns and performs the final inspection, which
includes:
1. Cleaning the glass with a ceramic glass cleaner (otherwise the white film will remain)
2. Checking the interior media
3. Checking for gas leaks
4. Performing an overall check to make sure that everything is working properly
When these activities are complete, initial startup is concluded and the fireplace may be operated by the owner.
Final Checks and Customer Instruction
Before releasing the unit to the customer for use without installer supervision, the installer must ensure that the
appliance is burning correctly. In addition, the installer must:
x
Review and explain unit operation to customer
x
Review and explain safety warnings to customer
x
Review and explain to the customer that glass is hot during and after operation
x
Review and explain maintenance requirements to the customer
x
Review and explain warranty requirements to the customer
x
Explain that if any questions or concerns arise, to contact the local ORTAL dealer/installer or ORTAL
directly for support.