Lido OG Manual
This instruction manual covers the basics that you need to get started using the Lido OG grinder. There is a second
document called the “Deep Dive Manual” (DDM) which gives in depth detail and expanded information from this basic
manual. The manuals, schematic and links to videos are available here: https://www.oehandgrinders.com/og-manuals
There is a 3rd area for people who never read manuals - it is called the Hand Grinder Parts section on our website,
oehandgrinders.com, where you can find repair parts... :)
Parts of the Grinder:
Adjustment Module
Micro Adjustment Disk (MD)
Stepped Adjustment Disk (SD)
Top Cap
Burr Module
Lower Bearing Holder
Ring Burr Carrier
Jar Holder
Top Nut
Handle
Micro Adjustment Disk (MD)
Stepped Adjustment Disk (SD)
Top Cap
Hopper
Bean Port / Plug
Ring Burr Carrier
Lower Bearing Holder
Jar Holder
Grounds Jar
Micro Adjustment Locking Pin
Knob
{
{
Install the handle so it points in the direction away from the locking pin.
Do NOT change the brass Micro Adjustment Disk setting at this time.
Your grinder arrives with the adjustment set at Micro Adjustment Disk (MD) = zero, Stepped Adjustment Disk (SD) = zero.
Note: Numbers on the Top Cap equal Microns (µm) of Verical Cone Burr Movement (VBM), not burr gap or particle size.
1000µm equals 1millimeter.
Set SD = 500, grind 10 grams of Coffee beans to lubricate the burrs.
Set SD back to zero, turn handle clockwise (CW) to observe what zero feels like.
This tactile information will be important later...
→
ALWAYS turn handle in clockwise direction
←
1
