Orolia Spectracom VersaPNT, Руководство по началу работы

Страница: 11 / 46

1.2.5 Coaxial Connectors
VersaPNT offers five (5) coaxial connectors, three (3) of which can be configured at the
factory to accommodate requirements for e.g., IRIG AM signals or additional 10 MHz out-
puts. The minimum configuration includes the
GNSS antenna and a 10 MHz sinewave out-
put.
Unless otherwise ordered at the factory, all coaxial connectors (aside from the GNSS con-
nection) produce a 10MHz output that is not software configurable.
All coaxial connectors are standard SMA connectors .
ETHERNET connector wiring:
1 through 8: A Ethernet Connect, 4 pairs, 1000bT
9 through 16: B Ethernet Connect, 4 pairs, 1000bT
POWER connector pinout
1: V
Main
, 10 to 32 V
DC
2: -not used-
3: V
Standby
, 10 to 32 V
DC
(Standby Power)
4: Ground return, standby power
5: Ground return, main power
1.2 Connectors and their Pinouts
VersaPNT Getting Started Guide Rev. 3.0 7